20
21
ENGLISH
BLUETOOTH
®
SET UP
The Bluetooth
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Lexibook® is under license.
Other trademarks and trade names are those of their respective owners.
© 2015 Bluetooth SIG, Inc.
Pairing
1. Power on the unit, press POWER/SOURCE (3) to switch to the Bluetooth®
mode. The LED display will indicate
“ bt ”
.
2. Activate Bluetooth® in your smartphone/tablet, search for the unit
“BT2000SW” and select (please refer to the instruction manual of your device on
how to active this function).
3. Once the unit is found, enter password “0000” to connect with smartphone/
tablet (some devices may not need password).
4. If your smartphone/tablet cannot find the unit or cannot pair, please power on
the unit again and repeat the above steps.
5. The sound tower automatically finds the last device it was paired with. If
the unit cannot auto connect the previous paired device, please re-activate
Bluetooth® in your smartphone/tablet and repeat the above steps to finish the
connection.
Notes:
• The Bluetooth® tower only connects to one device at a time.
• Make sure the effective distance between the Bluetooth® device and the tower
speaker is within 10m.
• Interference may occur during playback when using the Bluetooth® function
near other wireless devices. If playback through Bluetooth® is problematic, move
the Bluetooth® speaker and the playback device to a different location, or use
the 3.5mm AUX IN jack instead of the Bluetooth® function.
The music player may also turn off. To get the best control experience in the said
player, use the on-screen track controls of your music player rather than those on the
sound tower.
LED lamps
Press LED ON/OFF (4) to turn the LED lamps on/off.
Note: When the LED lamps are turning on, the red light will lighten from the
bottom to the top; and when the LED lamps are turning off, the red light will die
out from the top to the bottom.
BT2000SW_IM1225_V05.indb 21
28/05/2015 17:34
