18
NOTE!
When you install DIMM module fully into the DIMM socket, the eject tab should be
locked into the DIMM module very firmly and fit into its indention on both sides.
WARNING!
Once you hear " Beep Beep Beep" sounds after turning on the power ,
please check if the DRAM is installed properly or not.
2-7 List of Jumpers
1. JSB1: CMOS clear select
2. JSC3, JSC31 / 32 / 33 / 34: COM3 RS232/422/RS485 select
3. JSP1: ATX / AT Power type select
4. JSV1: S Video / HDTV select
5. JSD1: DPC Duty select
6. JSF1: CF card master and slave select
7. JVF1: CF card Power +5V/+3.3V select
8. JVC1: COM1 voltage select
9. JVC2: COM2 voltage select
10. JVC3: COM3 voltage select
11. JVC4: COM4 voltage select
12. JVL1: LCD Panel power select
13. JVP1: Panel Inverter power select
14. JVU8: USB8 voltage select
Please refer to page7 for installation of memory module.