93
Battery Low Voltage Level setting:
Auto mode:
Manual mode:
When the battery voltage is lower than the setting voltage,
the system will defi ne it as "Under voltage".
The below list with the options of battery levels user may choose depend
on its 12V or 24V battery.
Simply speaking, Auto Mode means CPC will decide when to turn on / off the MB;
there is no need of additional power switch.
Simply speaking, manual Mode means User can decide when to turn on / off the MB;
the additional power switch is necessary.
Note:
1. "Under voltage"function is not active under the default setting.
2. "Under voltage"function could be active when the ignition is at ACC or key plug-out.
3. When the battery is "Under voltage"-CPC constantly monitors the setting low voltage of battery
10 times / 10 minutes; CPC will set out the alarm via CPC AP. After 10 minutes, CPC will turn off
the MB & cut off the power output and hold the status.CPC will only 12V power when the
Key is back to ignition at ACC mode.
4. Please check if your car battery is 12V or 24 before starting the "Under Voltage" feature.
Otherwise, "Under voltage" function is not workable at wrong battery setting.
5. The default "Under voltage" is 10.5V for +12V battery; 22.5V for +24V battery
Level
12V Battery
24V Battery
1
11.75V
23.75V
2
11.50V
23.50V
3
11.25V
23.25V
4
11.00V
23.00V
5
10.75V
22.75V
6
10.50V
22.50V
7
10.25V
22.25V
8
10.00V
22.00V
9
9.75V
21.75V
10
9.50V
21.50V
11
9.25V
21.25V
12
9.00V
21.00V
Car Power Control (CPC) LED behavior.
CPC provides an on-board LED to show the current situation.
LED
Function
Active
Green
OS Delay Off
Battery Low Voltage
Delay Main Power On
Main Power Off delay
CPC Status indicator
ON:0.3sec x2, OFF:1sec
ON:0.3sec, OFF:0.3sec
ON:0.3sec,OFF:1sec
ON:1sec, OFF:1sec