42
3-14 Micro SIM Interface
PIN NO.
Description
PIN NO.
Description
1
VCC
5
GND
2
RST
6
VPP
3
CLK
7
DATA
4
NC
8
NC
9
NC
SIM1: MicroSIM Card(Push-Push) Socket Pin defi ne.
Follow ISO 7816-2 Smart Card Standard.
Note: 1. MPCE1 Pin 8, 10,12,14,16 for MicroSIM card reader use.
PIN NO.
Designation
Description
1
VCC
Power connection through which operating power is supplied to the
microprocessor chip in the card.
2
RST
Reset line through which the IFD can signal to the smart card's
microprocessor chip to initiate its reset sequence of instructions.
3
CLK
Clock signal line through which a clock signal can be provided to
the microprocessor chip. This line controls the operation speed and
provides a common framework for data communication between the
IFD and the ICC.
4
NC
Reserved
5
GND
Ground line providing common electrical ground between the IFD and
the ICC.
6
VPP
VPP:programming Voltage
7
I/O
Input/output line that provides a half-duplex communication channel
between the reader and the smart card
8
NC
Reserved
9
CD
CARD DETECTOR/NC
SIM1
Summary of Contents for 2I380NX
