54
Video Off in Suspend
This determines the manner in which the monitor is blanked.
Yes
Video will off.
No
Video always On.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3(default), 4, 5, 7, 9, 10, 11, NA.
AT Mode Function
This item simulate AT action from power off by system.
If you need the function, the value “Former-Sts” should be change to
“On” of PWRON After PWR-Fail of Super IO Device
The simulation procedure is:
1. Set the AT Mode function to Enabled
2. Set the PWRON After PWR-Fail to On under Super IO Device
3. Save and exit.
4. When Plug-in the power core, it will automatically turn on the system then boot in OS.
5. The system can not be power off, that will wake-up to turn on
after power off when press shutdown bottom
6. To completely cut off power need plug out the power core.
Resume by Alarm
This function is for setting date and time for your computer to boot up. During Disabled,
you cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to
the operating system, before this function will work
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS
(default)
Initial display power management signaling.
Blank Screen
This option only writes blanks to the video buffer.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical
and horizontal synchronization ports and write blanks to the
video buffer.
