22
pin1
CPP1
PIN NO. Description PIN NO. Description
1
3
5
7
9
11
13
15
17
19
Channel-DATA0+
Channel-DATA0-
Channel-DATA1+
Channel-DATA1-
Channel-DATA2+
Channel-DATA2-
Channel-DATA3+
Channel-DATA3-
Channel-CLK+
Channel-CLK-
2
4
6
8
10
12
14
16
18
20
+5V (OR +12V)
GND
GND
GND
GND
+LCD(5V or 3.3V)
+LCD(5V or 3.3V)
+LCD(5V or 3.3V)
ENBKL (+3.3V)
BRIGHT/ PWM dimming
.
LVDS1 : 18bits LVDS interface from CDV chipset(2x10 pin 1.25mm wafer)
Note : 1. Attention ! Check Device Power in spec
2. CDV-M N2600 /N2800 support LVDS 18Bits
3. Pin2 +5V power define by BOM for small size panel backlight power use
4. Pin12/14/16 provide LCD panel power set by
JVL1: LVDS panel +5V/+3.3V Voltage select
5. Pin 18 Backlight enable output, Hi enable (+3.3V) , Low disable (0V)
6. Pin 19 backlight dimming control. provided 200Hz / 275Hz / 380Hz / 20KHz /25KHz
and adjust PWM duty cycle by software program .
7. PWM duty cycle 100 % is Hi level +3.3V by power on default.
PIN NO. Description
1
2
3
4
5
+12V
GND
BRIGHT/ PWM dimming
ENBKL (+3.3V)
ENBKL (+ 5V )
.
CPP1: Panel backlight power (5pin 2.0mm wafer)
Note : 1. Attention ! Check Device Power in spec
2. Pin 3 backlight dimming control .provided 200Hz / 275Hz / 380Hz / 20KHz /25KHz
and adjust PWM duty cycle by software program .
3. PWM duty cycle 100 % is Hi level +3.3V by power on default.
4. Pin 4 Backlight enable output, Hi enable (+3.3V ) , Low disable (0V)
5. Pin 5 Backlight enable output, Hi enable (+5V ) , Low disable (0V)
LVDS1
