Lewmar Integra Autopilot Drive Manual ref B10420 iss.1
|
3
3- Installation
1- Bavaria & Constellation drive
89300136 Bavaria Kit
This drive kit is suitable for Constellation and Bavaria single
helm systems and consists of the following:
A. Drive unit
B. Constellation: 2m chain
Bavaria: Custom chain length
C. Autopilot drive clutch relay 12V
D. Clutch relay instruction leaflet
2- Mamba drive
89300137 Mamba kit
This drive kit directly couples to gearboxes and consists of
the following:
A. Drive unit
B. Autopilot drive clutch relay 12V
C. Clutch relay instruction leaflet
3- Cobra drive
89300203 Cobra Pedestal Kit
This drive kit directly couples to Integra Pedestal and con-
sists of the following:
A. Drive unit
B. Interface plate
C. Autopilot clutch relay 12V
D. Clutch relay installation leaflet
3.1 Overview
!
More than 7ft (2m) from the path of a radar beam. A radar beam can normally be assumed to spread 20° above
and below the radiating element
!
The equipment is supplied from a separate battery from that used for engine start. Voltage drops below 10V,
and starter motor transients, can cause the equipment to reset. This will not damage the equipment, but may
cause the loss of some information and may change the operating mode.
!
Other information Protected for use in engine compartments CE approvals conforms to:
89/336/EC (EMC)
BS EN60945:1997
94/25/ec (RCD)
BS EN28846:1993
A
B
C
A
B
B
A
