Using the mic
Key-lock function
The noiseless push buttons
and
as well as the polar pattern jog dial
can be locked by pressing the jog dial
knob
for more than 2 seconds.
■
⑥
⑧
④
④
Clipping history
Checking the clipping history lets you know if the microphone had experienced clipping in the past. The microphone displays
the clipping history after constantly pressing the high-pass push button
for more than two seconds. When in clipping history
mode the status indicator
flashes red and white in an alternating sequence, the polar pattern indications as well as the high-pass
indications
are not illuminated. Clipping history mode provides information and works according to the rules listed below:
⑥
②
⑤
LCT 840
■
The last manually set attenuation level is indicated by a constantly illuminated attenuation LED. If clipping has occurred in the past this
LED will flash.
■
T
he clipping history information can only be accessed once. Clipping information will be deleted after leaving this mode by constantly
pressing the high-pass filter push button
⑥
for more than two seconds.
■
Clipping history information will be deleted once you access the automatic attenuation mode.
■
Clipping history information will not be deleted when unplugging the microphone.
08
