Soul Play
Read & Save These
Operating Instructions
Instructions
Page 7 of 22
3.3
W
IRING
Use a listed Type CL3, CL3R, or CL3P 300V-rated speaker wire to comply
with local building and electrical installation codes. For more information
on these codes, contact a licensed electrician.
3.3.1
USA
Follow National Electric Code Article 725.136(D) where Class 3 circuit
conductors in enclosures are permitted to be installed with power circuits
where they are used solely to connect the equipment connected to Class
3 circuits and where power is routed to maintain a minimum of 6 mm (0.25
in.) separation from the conductors and cables of Class 3 circuits; or the
circuit conductors operate at 150 volts or less to ground and are installed
using Type CL3, CL3R, or CL3P wire.
3.3.2
C
ANADA
Follow Canadian Electrical Code Section 16-114 where conductors of
different circuits in the same enclosure may occupy the same enclosure,
provided that all conductors are insulated for the maximum voltage of
any conductor in the enclosure. Power supply conductors and other
conductors are permitted in the same enclosure when connected to the
same equipment and all conductors are insulated for the maximum
voltage of any conductor in the enclosure.
3.4
N
OTABLE
P
RODUCT
F
EATURES
a)
Soul Play can receive audio from any Bluetooth device and play
the audio to its internal speakers. This is called Bluetooth receive
mode.
b)
Soul Play can receive audio from any Bluetooth device, play the
audio to its internal speakers, and rebroadcast the audio stream
to up to 4 additional SKAA receivers. This is called Bluetooth relay
mode.
c)
Soul Play can receive audio from any SKAA transmitter and play
the audio to its internal speakers. This is called SKAA receive
mode.
d)
Soul Play can receive audio from any SKAA transmitter, play the
audio to its internal speakers, and rebroadcast the audio stream
to up to 4 additional SKAA receivers. This is called SKAA relay
mode.
