GoRave SOULWAY
READ & SAVE THESE
Operating Instructions
INSTRUCTIONS
Page 7 of 19
2.4
P
OWER
O
N
1.
Insert the power cord into an AC outlet.
2.
Ensure the power switch at the rear of the unit beside the AC power cord port is in the “I”
or on position.
3.
The standby LED indicator above the power button will light indicating that it is powered.
4.
Press the power button to bring the unit out of standby.
5.
The standby LED indicator will go dark and the SKAA bond LED above the bond button
will light indicating the unit is ready to receive a wireless signal from a SKAA transmitter.
2.5
C
LUSTERING
TODO
2.6
TV
S
ETUP
<Diagrams of Talisa and TV here>
a)
Install the GoRave TV Transmitter into your TV.
i.
Insert the optical cable into your TV’s TOSLINK/SPDIF port.
ii.
Insert the USB cable into your TV’s USB port. Note that the USB port is for power
only, and the included USB power supply can be used if you do not have a USB
port on your TV.
b)
Play some audio on your TV by watching a broadcast program or a streaming service.
c)
Double-click the bond button on SOULWAY. The bond LED status indicator should turn
bright amber and you will hear your audio playing.
