SOS Item #5585
Lead Time 14 Days
23
LEVOLOR.com
Problem
Louvers are not working properly.
Solution
Replacing Damaged Tilt Bar Connectors
1. Remove tilt bar completely.
2. Using a pair of pliers, grab hold of the damaged connector.
3. Bend and/or twist the connector until it is removed from the tilt bar.
4. Set a new connector in the vacant hole.
5. Using the pliers, hold the connector as close to the base as possible.
6. Using a mallet strike the pliers near the connector to fully set it in the tilt bar.
NOTE:
This process can be difficult, so please use caution to prevent damage and/or injury.
Replacing Clear Tilt Connectors
1. Remove broken connectors.
2. Snap new connector into the louver.
3. Rotate the connector so the open "U" shape is straddling the Clear Tilt bar.
4. Press on the connector and move the connector up or down until the snap feature aligns with
the hole in the bar and firmly sets.
Troubleshooting
For more detailed information and easy to follow videos, visit LEVOLOR.com/Shutters
