SOS Item #5585
Lead Time 14 Days
13
LEVOLOR.com
Motorized Shutters
•
LEVOLOR’S motorized operating system integrates our Gear Closure System with a motor to adjust louvers using
a remote or the LEVOLOR app
•
Tilt only operation - using remote, app or manual operation
•
Manually operating louvers will not damage motor
•
2 remote options:
•
Motorized tilt is available with or without tilt bar
•
Available with all four-sided frame types (excluding mounting strip)
•
One manual control button per motor located on back of panel
•
Manual control button is for pairing only and will NOT fully operate
the shutter
•
Motorized shutters are battery powered, the battery tube uses 8 AA
alkaline batteries (provided with initial order)
•
A shutter panel with a divider rail will have two motors which allows for
flexibility in programming and operation.
•
Limit two motors per panel
•
Motorized shutters panels with two divider rails can be motorized but the middle section will be linked to either the
bottom section or the top section. Preference must be selected at time of order
•
Multiple panels available with patented panel connector option (see panel connector section for details)
•
Do not install LEVOLOR Motorized shutters where there is direct contact with moisture (ie: inside a shower)
•
Minimum motorized panel width is 17”
•
Motor will run even if louvers are already in the commanded position, this is necessary in order to allow for the
manual operation without damaging the motor
•
Louver rotation speed or rotation alignment - there may be some variation in the speed at which the louvers rotate
from section to section or panel to panel. Likewise, there may be some slight misalignment of the louvers in different
panels or sections as they rotate to the desired position.
Patented Panel Connector
•
This unique feature joins two adjacent panels so they can operate simultaneously using only
one motor
•
Reduces the overall motorization cost
•
Panels linked by the panel connector can still be individually operated by
manually opening and closing the louvers
•
Panel Connector will not work through a T Post
Battery Compartment
Manual
Control
Button
Louver
1 Panel
No Divider Rail
2 Panel
No Divider Rail
No "T" Post
3 Panel
No Divider Rail
No "T" Post
4 Panel
No Divider Rail
No "T" Post
# of Motors without
Panel Connector
1
2
3
4
# of Motors with Panel
Connector
1
1
2
2
1 Panel
2 Panels
3 Panels
4 Panels
