INSTALLATION
10
OUTSIDE MOUNT (OM)
STEP 1: MARKING THE BRACKET LOCATIONS
IMPORTANT:
The brackets must be flush against a flat mounting surface. Do NOT
mount brackets on curved molding.
•
Position the box brackets at each end of the headrail
•
Position the center support bracket (if included) in the center if using only one.
If more than one center support bracket is included, space them evenly along
the headrail.
•
Use a level to ensure all brackets are even and aligned. Mark the bracket mounting
hole locations, two per bracket, making sure they are square and equally spaced.
STEP 2: INSTALLING THE BRACKETS
•
Drill pilot holes using a
1
⁄
16
" drill bit using pencil marks as a guide.
•
While holding the brackets in place, secure the brackets using two screws per bracket.
•
Use a level to ensure all brackets are even and square with each other.
End
bracket
Center support bracket(s)
(if included)
Motorized Tilt Operation
Drywall
Anchor
Box
bracket
Center support
bracket(s)
(if included)
Screws (2 per bracket)
