B E F O R E U S I N G
1.
Remove all packaging from the filter
cartridge.
2.
Remove the restrictor caps from the
bottom of the filter. [
Figure 1.1
]
3.
Soak the filter cartridge in clean tap
water (submerged completely) for 15
minutes.
NOTE:
There may be carbon dust in the water
while rinsing or soaking the filter. This is normal.
4.
Rinse the filter cartridge thoroughly for
10 seconds under running water.
5.
Replace the restrictor caps on the
bottom of the filter.
Figure 1.1
Figure 1.2
Figure 1.3
Figure 1.4
Figure 1.5
+ position
– position
Restrictor Cap Settings
Restrictor Cap Settings
• Place the restrictor cap in the “+”
position if you want water to filter
faster, or in the “-” position if you want
water to filter more thoroughly.
[
Figure 1.2
]
• You can remove the caps completely
if you want water to filter as fast as
possible.
• Make sure the rubber gasket is
correctly in place on the filter cartridge.
If the rubber gasket has come loose,
press into place, making sure the ridge
is facing up. [
Figure 1.3
]
6.
Place the filter cartridge into the filter
chamber. Press the cartridge into place
as firmly as possible to prevent leaks.
[
Figure 1.4
]
7.
Fill the pitcher with cold tap water.
Discard the filtered water. Refill and
discard the water 2 more times.
8.
Reset the filter timer by pressing
firmly for 8 seconds. Your filter is ready
to use. [
Figure 1.5
]
