EN
11
CARE & MAINTENANCE
Cleaning the Air Purifier
Cleaning the Air Quality Sensor
Resetting the Check Filter Indi-
cator
Check Filter Indicator
1.
Wipe the outside of the air purifier with
a dry cloth.
Do not
clean with water or
any other liquid to avoid risk of electric
shock.
2.
Clean the outside of the filter with a
brush or vacuum hose each month
to prevent buildup of hair or dust. Do
not clean the filter with water or other
liquids.
Figure 3.1
If the air quality sensor is blocked by
accumulated dust, the air quality indicator
may not work correctly.
Reset the Check Filter Indicator when:
•
lights up.
1.
Replace the filter (see 12).
2.
Turn on the air purifier.
3.
Press and hold for 3 seconds.
4.
The light will turn off after the filter
indicator is successfully reset.
•
The filter was changed before lit up.
1.
Press and hold for 3 seconds
until lights up.
2.
Press and hold again for 3
seconds.
3.
The light will turn off after the filter
indicator is successfully reset.
will light up as a reminder to check the
filter. The indicator is automatic. You may
not need to change your filter yet, but you
should check it when lights up.
1.
Unplug the air purifier.
2.
Open the sensor cover.
3.
Clean the sensor lens with a damp
cotton swab.
[Figure 3.1]
4.
Dry the sensor lens with a dry cotton
swab.
5.
Close the sensor cover.
Storage
If not using the air purifier for an extended
period of time, wrap the filter in plastic
packaging and store in a dry place to avoid
moisture damage.
lens inside
opening
