Levo II, User Manual

Page: 20 / 65

Symptom: LEVO is leaking.
LEVO dispenses through a silicone nozzle that screws on to
the base of the reservoir. If the nozzle is not screwed on
straight or properly inserted into the unit, liquid can leak
out of the nozzle onto the heat plate beneath the reservoir.
This requires additional cleanup. To avoid this, make sure
you are holding down the
RELEASE button when you are
lowering the reservoir into the LEVO chamber and line the
nozzle up with the dispensing hole. Hold down the
RELEASE
button when removing the empty reservoir after your
infusion is complete. If the nozzle rips and is stuck inside
the machine, press and hold the
RELEASE button to release
the pinch valve while removing it from the dispense hole
with tweezers and contact us for a replacement piece.
Check out the LEVO blog for more
tips of using your machine and
avoiding common issues.
Tag your creations with #LEVOmade
on social!
19
Symptom: I can’t connect my App to my LEVO II.
First, download the LEVO App if you don’t have it yet. You’ll
need the app to connect your LEVO to WiFi and to control
your LEVO remotely. If you’re experiencing trouble
connecting your LEVO II to WiFi via the App, your LEVO may
need to be reset. First, look at your LEVO II’s screen and
check if there’s a solid WiFi icon, a blinking WiFi icon, or no
WiFi icon. In order to connect your phone, the WiFi icon
should be invisible. Your phone also must be connected to
your local WiFi network before starting. If the WiFi icon is
blinking, follow the reset instructions below where
symptom is labeled “The WiFi icon on my LEVO is blinking.”
If the WiFi icon on your LEVO’s screen is already invisible
and you still can’t connect, check your home WiFi to be
sure it is on and working. You may need to unplug your WiFi
modem/router and plug it back in your internet is
temporarily down.