Levo II, User Manual

Page: 14 / 65

Dry cycle can be adjusted up to
175° F/80° C and 10 hours.
The Activate cycle can be adjusted
up to 275°F/135°C and 2 hours.
Dry & Activate Instructions
1. Press POWER to turn on.
2. Open the lid by pressing down on it gently to
release the latch and double check that the
reservoir is properly nested inside your LEVO
(See GETTING STARTED Step 6).
3. Remove your Herb Pod and place the Pod
Protector inside, flat against the bottom of your
pod (you can leave your Pod Protector in while
infusing, too). Then add your ingredients, and
take care to not pack too tightly. With the
silicone cap securely in place, add your packed
Herb Pod back to the reservoir, lining up the
magnetic strip with
PLACE POD HERE text .
4. Press the *blinking* CYCLE button to select
DRY or ACTIVATE .
5. LEVO will automatically suggest a default time
and temperature for the selected cycle. You can
adjust the time and temperature setting as
needed by pressing the + and - buttons (see
below for min and max settings). Press
START .
13
The Magnetic Stirrer is not needed
for Dry and Activate cycles- we
recommend removing it and adding
back before you Infuse!