User Manual for LCO-i100 Console
www.levitronix.com
PL-4066-00, Rev03, DCO# 21-230
10
3
Engineering Information
3.1 IP Rating
The console is tested to meet
IP65.
Note: Units older than 2018/19 have IP40. These older units can be identified by having only 2 pressure
inputs (instead of 3 pressure inputs) on the connector back plane.
3.2 Temperature Monitoring
To avoid overheating of the system, the console
’s motherboard processor reduces its clock frequency at 85°C
and stops the system at 100°C. However, under normal operating conditions the console is far below these
temperatures.
4
Installation
4.1 Mechanical Installation
The console
LCO-i100
is made for desktop operation on a horizontal surface or can be wall-mounted to an
appropriate vertical surface. For wall-mounting the four pre-assembled rubber stands on the bottom have to
be removed. The underlying four M4 threads can be used for the wall-mounting according to the specifications
in
Number of threads
4
Thread diameter
M4
Thread depth
8 mm
Maximum torque
0.6 Nm
Thread distance
170 mm x 114 mm
Console weight
1.6 kg (without cables)
Table 8: Specification for wall-mounting
Figure 8: Bottom view of the console housing
Note 1: Not available on units older than 2018/19.
For wall-mounting. Feet to be removed.
VESA 100 mounting interfaces.
1
