WARNING:
•
HIGH VOLTAGE: RISK OF ELECTROCUTION, SHOCK, EXPLOSION, OR ARC FLASH.
•
This equipment
MUST
be installed and serviced by qualified electrical personnel with the
requisite knowledge, training and experience related to the installation and operation of
this equipment.
•
TO AVOID FIRE, SHOCK OR DEATH,
turn off all power supplying equipment before
working on or inside the equipment. Use a properly rated voltage sensing device to
confirm power is off.
•
Follow safe electrical work practices. See NFPA 70E in the USA, or applicable local codes.
•
Product may use multiple voltage/power sources. Be sure all sources of power have been
disconnected before servicing.
•
Do not depend on this product for voltage indication.
•
Only install this product on insulated conductors.
•
If the meter appears damaged or defective, first disconnect all power to the meter.
Then call or email technical support for assistance.
•
The equipment must be accessible to authorized personnel only. Equipment must be
installed in areas where access can be restricted.
•
DO NOT
work alone.
•
Before closing all covers and doors, carefully inspect the work area for tools and objects
that may have been left inside the equipment.
•
DO NOT
bypass external fusing.
•
DO NOT
short the secondary of a Voltage Transformer (VT).
•
Always short the secondary of a current transformer prior to disconnecting current
input loads.
CAUTION:
•
Use the unit only in accordance with the electrical power rating
•
Initial installation of the unit must be inspected by the local electrical Inspection Authority
•
Install the unit in compliance with the following local and national electrical codes:
• Canada: Canadian Electrical Code, Part I, CSA C22.1
•
United States: National Fire Protection Association (NFPA) 70; US National
Electrical Code
• Elsewhere: International Electrotechnical Commission (IEC) 364, Part 1-7
•
Ensure that the unit is properly earthed
•
If the equipment is installed or used in a manner other than that specified in this document,
it may void your warranty or impair the protection of the equipment.
WEB
VERSION