Leviton Verifeye 8000 Series Installation Manual Download Page 14

5  Warranty and Contact Information

11

The Leviton  name, Leviton logo and VerifEye brand used in this guide are trademarks or registered 
trademarks of Leviton. Other trademarks used are the property of their 
respective owners.

This product must be installed, connected and used in compliance with prevailing standards and/or 
installation regulations. As standards, specifications and designs change from time to time, always ask for 
confirmation of the information given in this publication.

LIMITED 5 YEAR WARRANTY AND EXCLUSIONS

Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time 
of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for five years from 
the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option. 

For details 

visit www.leviton.com or call 1-800-824-3005.

 This warranty excludes and there is disclaimed liability for labor for 

removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper 
environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating 
conditions or not in accordance with any labels or instructions. 

There are no other or implied warranties of any 

kind, including merchantability and fitness for a particular purpose

, but if any implied warranty is required by the 

applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular 
purpose, is limited to five years. 

Leviton is not liable for incidental, indirect, special, or consequential damages, 

including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure 
to perform this warranty obligation

. The remedies provided herein are the exclusive remedies under this warranty, 

whether based on contract, tort or otherwise.

FOR TECHNICAL ASSISTANCE CALL:

1-800-824-3005 (USA Only)

1 800 405-5320 (Canada Only)

Leviton Manufacturing Co., Inc.

201 North Service Road, Melville, NY 11747

Visit Leviton’s Web site at http://www.leviton.com

© 2019 Leviton Manufacturing Co., Inc. All rights reserved.

TRADEMARK DISCLAIMER:

Use herein of third party trademarks, service marks, trade names, brand names and/or product names are for 
informational purposes only, are/may be the trademarks of their respective owners; such use is not meant to imply 
affiliation, sponsorship, or endorsement.

WEB 

VERSION

Summary of Contents for Verifeye 8000 Series















Reviews: