D
ESCRIPTION OF
A
PPLICATION
This Addendum is a supplement to the regular miniZ Users’ Guide which
is enclosed with every miniZ shipped. The miniZ Users’ Guide covers all
non-network installation procedures and settings for the Remote
Networking miniZ. The Remote Networking Addendum covers only the
installation procedures and settings specifically for these products.
The Remote Networking miniZ is intended for use as a slave relay,
daylight harvesting controller to a master Z-MAX Relay Panel. The Z-
MAX Relay Panel can control all scheduled events of the miniZ Remote
Network controller. In addition, it can be configured to operate with the
wall station controls and/or occupancy sensors either directly connected
to the Z-MAX Master or to the miniZ Remote. In all cases, the photocell
needs to be connected directly to the miniZ Remote.
Communications are handled over a LumaNET bus cabling with Cat-3 or
Cat-5, 8-wire cable per the installation guide of the Z-MAX Master Relay
Panel.
The following is an example of a one-line diagram for a typical
application. This illustrates how the Remote Networking miniZ is used
with a Z-MAX Master Relay Panel.
STEP 1
Page 2
DESCRIPTION OF APPLICATION
Summary of Contents for miniZ mZn20-102
Page 2: ...NOTES ...
