Leviton Hi-Fi 95A02-3, Installation Manual

Page: 8 / 20

4
5
6
11 12
7
8
9
10
5. Local Audio Inputs
These jacks are where local line-level audio inputs are connected.
6. Variable Output for Zone 1
This is a variable audio output used for attaching additional amplification to
Zone 1.
7. Page Input
When this input is triggered, all audio zones are turned on at their preset
paging volume (or muted) and switched to Source 4.
8. “System On” Output
This output is energized when any audio zones are turned on. Used to turn
on an auxiliary amplifier that is equipped with a voltage trigger.
9. Serial Control
This jack is where an LEVITON controller or other device with a serial
interface is connected for configuration and control of the Hi-Fi 2 4x4.
10. Ethernet Port
This port allows a device to connect to, configure, and control the
Hi-Fi 2 4x4 via a network. Used to interface with the Hi-Fi 2 Setup Utility and
LEVITON Dock.
11. Power On / Fault LED Indicators
The LED under the respective audio zone illuminates green when the audio
zone is on. The LED under the respective audio zone illuminates red when
there is a fault with the zone amplifier.
12. Standby LED indicator
This LED is illuminated green when power is connected to the unit. This LED
is off when any of the audio zones are turned on.
WEB
VERSION