Leviton Hi-Fi 95A02-3, Installation Manual

Page: 12 / 20

8
3. Remove the rubber keypad.
4. Insert the new rubber keypad. Align the latches of the new insert to the openings on the VSC and
gently snap into place.
5. Attach the new faceplate.
Serial Control
Hi-Fi
TM
2
4x4 can be remotely controlled
through an LEVITON controller or by a device
with a serial interface. When connected, the
remote device can select an audio zone and
change its power state, source, volume
setting, and mute setting, completely
configure the
Hi-Fi 2 4x4 system, and issue
transport controls to compatible sources.
Connect
Hi-Fi 2
4x4 to an LEVITON Omni
TM
or Lumina
TM
series Home Control System by
inserting the supplied straight-through, 4-
position modular cable between an available
serial interface connector on the LEVITON
controller and the modular connector labeled
“Serial Control” on the
Hi-Fi 2
4x4 Main
Assembly.
TO SERIAL PORT ON
CONTROLLER
CONTROLLER
Connect to controller to select
zone and source, and control volume
and power from an OmniTouch
touchscreen or via controller program.
WEB
VERSION