DRC
TM
Wi-Fi
®
Room Controller
Cat. No. DRKDN-Uxx
120-277 VAC, 50/60 Hz
INSTALLATION INSTRUCTIONS
ENGLISH
DI-000-DRKDN-00A
WARNINGS
•
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER
AT CIRCUIT BREAKER OR
FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
CAUTIONS
• To be installed and/or used in accordance with appropriate electrical
codes and regulations.
• If you are unsure about any part of these instructions, consult an electrician.
• Use this device with
copper or copper clad wire only.
• For indoor applications only.
• Save these instructions.
GreenMax
®
The DRC Wi-Fi Room Controller is designed to be used to coordinate and control multiple Intellect
TM
fixtures and sensors within a room, as well as connected to the system
Wi-Fi network for coordination with other GreenMax
®
DRC
TM
devices. It provides all energy management functionality both as required by code and as desired by the user. All aspects
of the system can be configured to meet the specific needs of the end user and their application. An initial configuration can be created without any special tools using only the room
controller and installed devices within the room. System refinements can be made using the Leviton GreenMax
®
DRC
TM
app from your smartphone or other Wi-Fi enabled Android
TM
or
iOS
TM
device.
Squeeze sides
to release
Line up tabs and
press in side to
attach
Factory default button
NOTE:
Buttons and wallplates can be custom engraved to your specifications.
Contact Leviton for availability and order details. To install a color change kit:
1.
Squeeze the sides of the button frame to release snap tabs and remove.
2.
Install new buttons and wallplate.
DRKDN-U1W
(one button)
DRKDN-U2W
(two buttons)
DRKDN-U4W
(four buttons)
DRKDN-U8W
(eight buttons)
1.
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER
at circuit breaker or fuse
and test that power is off before wiring!
2.
Remove 3/4 in. of insulation from each wire lead and connect per diagram. After all
connections have been made, ensure that all wire connectors are firmly attached and
there is no exposed copper.
NOTE:
For connection to Wi-Fi network and smartphone
NOTE:
For connection to Intellect & LuminaRF
TM
devices
1.
Requires standard device backbox.
2.
May be multi-ganged.
3.
Decora faceplate purchased separately.
4.
Each room requires at least one room controller, other keypads may be used
as remote keypads.
3.
Gently place wires and device into wall box and secure with mounting screws.
4.
Install Decora
®
wallplate.
Installation is complete
.
* NOTE:
This device accepts Decora
®
wallplates (both types - screwless and with screws).
If screw plates are used, remove the four tabs at the corners of the mounting strap to avoid
interference with the wallplate.
*
Remove tabs if
using screw type
wallplate
BK
WH
Neutral (White)
Line
120-277VAC, 50/60 Hz
Hot (Black)
SPECIFICATIONS
Input Voltage/
Frequency
120-277VAC, 30mA Max, 50/60Hz
Input Current Max
250mA
Input Current
Standby Power
< 0.5W
IP Rating
IP30
Network Connections
Network 1: Wi-Fi – as client to another access point, or, as an access
point for direct connection using the Leviton GreenMax
®
DRC
TM
app.
Network 2: 2.4”GHz Wireless Mesh for connection to compatible
Intellect, LuminaRF, or Zigbee devices
Operating
Temperature
0-40°C
Storage Temperature
-20-85°C
Description
Pre-Requisites
Installation
Color Change and Button Kits
WEB
VERSION
