Mixing Audio Amplifier
DI-040-41920-25A
4.1.4. Loop Output
Variable line level output. Output level changes with the line volume control.
4.2. Microphone input
The microphone input has three modes, and different modes use different
connections:
48V
MIC
LINE
4.2.1. 48V phantom power input
With the switch set to “48V”, the microphone input will provide a 48V phantom power.
This is typically used with condenser microphones.
Connect as follows:
“+” connects to positive, “-” connects to negative and “╧” connects to ground.
Note
: Use with condenser microphones only.
4.2.2. MIC input
With the switch set to “MIC”, the microphone input is used to connect dynamic
microphones.
Connect as follows:
“+” connects to positive, “-” connects to negative and “╧” connects to ground.
4.2.3. LINE input
With the switch set to “LINE”, the microphone input is used to connect with line level
audio or a wireless microphone output.
Connect as follows:
“+” connects to positive, “-” connects to negative and “╧” connects to ground.
