23 / 30
To replace the blade:
◆
Using heavy-duty gloves, grip the blade.
◆
Place the blade (1) on the pins on the fan hub and insert the blade bolt into the hole in the shaft.
Note: When fitting the blade, the blade flaps must be facing the inside of mower.
◆
Use the correct spanner to securely tight the blade bolt by turning the spanner clockwise.
◆
Tighten the blade bolt as firmly as possible by hand. Bolt tightening torque: 20 Nm.
c) Maintenance
There are no parts inside the equipment which require additional maintenance.
d) Ordering replacement parts:
Please quote the following data when ordering replacement parts:
Model, type and serial number of the machine (see name plate)
Part description
e) Spare parts
P/N ............................. Description
SF7A113-20 ................ Blade LM 32 K
SF7A102-27 ................ Blade LM 32 A
9. Troubleshooting
If your appliance seems not to operate properly, follow the instructions below. If this does not solve
the problem, please contact us.
Problem
Possible Cause
Possible Solution
Machine
fails
to operate
Power turned off
Turn power on
Grass too long
Increase the height of
cut and move machine
to shorter grass to start
Machine
ragged
Height of cut too low
Increase height of cut
Cutting blade blunt
Replace the blade
Underside of machine
clogged
Check underneath the machine and clear out as
necessary (always wear heavy duty gloves)
Blade fitted upside down
Refit blade correctly
10. Disposal
Protect the environment! This electrical equipment may not be disposed of with general/
household waste. Used electrical equipment is needed to deliver the collection system,
dealing with environmental waste disposal.
11. Warranty
The warranty rules issued by our company or the importer apply to every country. As part of the
warranty, we remedy malfunctions on your appliance free of charge provided that this malfunction is
caused by a material or manufacturing defect. In the event of a warranty claim, please turn to your
dealer or the nearest branch office with the purchase receipt.