11
If it proves impossible to pull the chain through despite the selector being in neutral, it may be
necessary to release the brake first, by turning the brake wheel anti-clockwise. If this does not help,
set the selector to position DOWN, load the chain slightly and jerk the lever in clockwise direction.
Then try again without load but with the selector in neutral.
Fig. 2 description
Suspension of lever hoist
Make sure the hoist in suspended from an eye, shackle or similar with sufficient bearing capacity.
With the chain tightened, both hooks must be in line (Fig. 3a).
NB
Neither hoist, hooks nor chain may be subjected to bending stresses (Figs. 3b and c and Fig. 4).
Fig 3 a
Fig 3 b
Fig 3 c
Fig. 1 Dimensioned sketch
Brake Wheel
Hook Latch
Down
Selector
Up
Lever Arm
