LevelOne WPC-0100, Installation Manual, Page: 28 / 60

27
1. Encryption Function
You may enhance the security of your network by enabling the
“Encryption” function. The WEP Required Mode enables you to define the
encryption keys that your IEEE802.11b PCMCIA should use.
! Caution:
If you wish to enable the “Encryption” function, you must enable this
function for all computers of your network, and the WEP key needs
to be the same for all IEEE802.11b stations.
Follow the steps below to set your WEP Required Mode:
(1) Select one mode by clicking the pull-down button in the WEP
Required Mode frame. Set the WEP key in your PC card by
selecting one of the following modes:
A. Auto Generate 64 bits
B. Auto Generate 128 bits
C. Manual Generate 64 bits
D. Manual Generate 128 bits
(2) If you select “Auto Generate 64 bits” or “Auto Generate 128 bits”
mode, type “Pass” and the WEP key will be automatically
generated in Key1 box.