LevelOne WPC-0100, Installation Manual, Page: 23 / 60

22
3.4.1 Set Basic Parameters
1. Basic Setting for Infrastructure Mode
If you want to connect with an Access Point, please follow the process
below:
1. Select the “Setting” tab
2. Select the Network Type as ”Infrastructure”
3. Select the correct SSID
4. Press the “Apply” button.
SSID is the group name that will be shared by every member
of your wireless network .You will only be able to connect
with an Access Point (AP), which has the same SSID. Note
that the SSID will be case sensitivity.
Channel: If the Mode is Infrastructure, this parameter will not
be active.