LevelOne WHG-505 User Manual Download Page 61

Page: 61 / 314

5.2.2 NT Domain

Choose “NT Domain” from the Authentication Database field. Except Local authentication, the Local VPN option

in other authentication option only can be enabled or disabled for the entire Authentication Database.

Click the button Configuration for further configuration. Enter the server IP address and enable/disable the

transparent login function. These settings will become effective immediately after clicking the Apply button.

Server: The IP address of the external NT Domain Server.

Transparent Login: This function refers to Windows NT Domain single sign-on. When Transparent Login is

enabled, clients will log into the system automatically after they have logged into the NT domain, which

means that clients only need to log in once.

Enable Local VPN: Check the checkbox to enable local VPN under transparent login mode. When

enabled, local VPN connection will be automatically created under transparent login mode. For the

local VPN to work under transparent login mode, however, it requires support from Windows

Server – need to install additional logon script on Windows Server.

Summary of Contents for WHG-505



























































































































































































































































































































Search results

Summary of Contents for WHG-505

Reviews:

Related manuals for WHG-505

Brands by name

Popular brands

LevelOne WHG-505, User Manual

Search results

Summary of Contents for WHG-505

Reviews:

Related manuals for WHG-505

Brands by name

Popular brands