LevelOne WGR-2301 User Manual Download Page 181

Page: 181 / 206

Chapter 14 VPN

http://www.level1.com

Page 181

14.5

Firmware Upgrade

This section describes the

System > Firmware Upgrade

page and the software upgrading

procedure. In this page, you can view the information of the currently running version, and

download the latest version of software from the LEVELONE official website.

Figure 14_6 Firmware Upgrade

Version information: Displays the information of the current hardware version, software

version used by the device.

Download the latest version: Links to the official website of LEVELONE to download the

latest version of the software.

Upgrading steps:

Step 1: Download the latest version of software

Click on the hyperlink "Download the latest version" and go to the official site of LEVELONE to

download the latest version of the software to your local PC.

Tip

Please select the most appropriate type of the latest software. The applicable hardware

version for the downloaded software must be consistent with the hard versions of the current

products.

It is recommended that before upgrading, enter into

Systems management -> Configuration

management

to back up the current configuration of the system.

Step 2: Select the path where the upgraded software resides

In the "Select the upgrade file" text box, enter the path for upgrading the software on the local PC,

Summary of Contents for WGR-2301















































































































































































































Search results

Summary of Contents for WGR-2301

Reviews:

Brands by name

Popular brands

LevelOne WGR-2301, User Manual

Search results

Summary of Contents for WGR-2301

Reviews:

Brands by name

Popular brands