Setup
14
Configuration Program
The Wireless Router contains an HTTP server. This enables you to connect to it, and
configure it, using your Web Browser.
Your Browser must support JavaScript
.
The configuration program has been tested on the following browsers:
Netscape 7.1 or later.
Mozilla 1.6 or later
Internet Explorer V5.5 or later
Preparation
Before attempting to configure the Wireless Router, please ensure that:
Your PC can establish a physical connection to the Wireless Router. The PC and
the Wireless Router must be directly connected (using the Hub ports on the Wire-
less Router) or on the same LAN segment.
The Wireless Router must be installed and powered ON.
If the Wireless Router's default IP Address (192.168.0.1) is already used by anoth-
er device, the other device must be turned OFF until the Wireless Router is
allocated a new IP Address during configuration.
Using your Web Browser
To establish a connection from your PC to the Wireless Router:
1. After installing the Wireless Router in your LAN, start your PC. If your PC is al-
ready running, restart it.
2. Start your WEB browser.
3. In the
Address
box, enter "HTTP://" and the IP Address of the Wireless Router, as
in this example, which uses the Wireless Router's default IP Address:
http://192.168.0.1
4. When prompted for the User name and Password, enter values as follows:
User name admin
Password password