LevelOne WBR-5400 User Manual Download Page 81

Page: 81 / 82

Figure 6: Authentication success

4.2

DUT authenticate PC2 using PEAP-TLS.

1. PC2 choose the SSID of DUT as the Access Point.

2. Set authentication type of wireless client and RADIUS server both to

PEAP_TLS.

3. Disable the wireless connection and enable again.

4.The DUT will send the user's certificate to the RADIUS server, and then

send the message of authentication result to PC2.

5. Windows XP will prompt that the authentication process is success or fail

and end the authentication procedure.

6. Terminate the test steps when PC2 get dynamic IP and PING remote host

successfully.

Support Type:

The router supports the types of 802.1x Authentication:

PEAP-CHAPv2 and PEAP-TLS.

Note.

1.PC1 is on Windows XP platform without Service Pack 1.

2.PC2 is on Windows XP platform with Service Pack 1a.

3.PEAP is supported on Windows XP with Service Pack 1 only.

4.Windows XP with Service Pack 1 allows 802.1x authentication only when data encryption

function is enable.

Summary of Contents for WBR-5400



















































































Search results

Summary of Contents for WBR-5400

Reviews:

Brands by name

Popular brands

LevelOne WBR-5400, User Manual

Search results

Summary of Contents for WBR-5400

Reviews:

Brands by name

Popular brands