Introduction
9
Rear Panel
Figure 3: Rear Panel
ADSL port
Connect this port to your ADSL line.
10/100BaseT
LAN connec-
tions
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.
Note:
Any LAN port on the Wireless ADSL2/2+ Modem Router will
automatically function as an "Uplink" port when required. Just
connect any port to a normal port on the other hub, using a
standard LAN cable.
Reset Button
(Reset to De-
faults)
This button will reset the Wireless ADSL2/2+ Modem Router to
the factory default settings.
To do this, press and hold the Reset Button for five (5)
seconds, until the Status LED is lit, then release the Reset
Button, and wait the Wireless ADSL2/2+ Modem Router to
restart using the factory default values.
Power port
Connect the supplied power adapter here.
