LevelOne WAP-8131, Web Management Manual

Page: 34 / 60

34
obligated to follow the government regulations for that region.
User Isolation
This feature effectively segregates the wireless of your choice
from the rest of the Network. With Ethernet-to-WLAN Access
disabled, information sent from the Ethernet side will not be
passed to the Wireless Clients. However, wireless clients will still
be able to transmit across Ethernet for browsing, etc.
Short GI
Short GI (Short Guard Interval)
Short Guard Interval shortens the waiting time to 400 ns,
Guard Interval is intended to avoid signal loss from multipath effect.
Coverage Threshold Perform a Network Planning and Deployment Analysis
Install your access points strategically to maximize network
coverage. It is recommended to perform a network performance
diagnosis prior to the wireless network deployment.
Network performance is usually reduced by a retry packet rate
close to or over 10%. This deficiency could be caused by frequency
interference or screened devices. if a first analysis does not meet
the expected network quality standards. need to be improved and
the access points that need to be repositioned or have their settings
reconfigured to improve network coverage, signal quality and
overall user experience.
Packet Threshold
This value should be left at the default value of 2346. If you are
experiencing high packet error rate, slightly increase your
fragmentation threshold within the value range of 256-2346.
Setting the fragmentation threshold too low may result in poor
performance.
RTS Threshold
This value should be left at the default value of 2347. If you
encounter inconsistent data flow, only minor modifications to the
value range between 50-2347 are recommended.