11a/b/g Wireless Multi-Client Bridge/AP/WDS
Version 1.0
36
4 Access Point Mode – Web Configuration
4.1 Logging In
To configure the Access Point through the web-browser, enter the IP address of the
Access Point (default:
192.168.1.2
) into the address bar of the web-browser and
press
Enter
.
Make sure that the Bridge and your computers are configured on the same subnet.
Refer to
Chapter 2
in order to configure the IP address of your computer.
After connecting to the IP address, the web-browser will display the login page.
Specify the
User Name
and
Password
. The default user name and password are
levelone
then click on the
Login
button.
After logging in you will graphical user interface (GUI) of the Access Point. The
navigation drop-down menu on left is divided into seven main sections:
1.
System
: This menu includes system related settings such as firmware upgrade,
reset to factory defaults, system date/time configuration and configuration wizard.
2.
Wireless
: This menu includes the settings such as network visibility, channel, data
rate, and security. Also included are advanced wireless settings such as wireless
MAC clone and RTS/fragmentation threshold.
3.
LAN
: This menu includes the LAN and DHCP client/server settings.
4.
Filter
: This menu includes MAC address filter settings.
5.
Logs
: This menu displays the system log.
6.
Status
: This menu displays the wired and wireless statistics
7.
Help
: This menu describes the features of the device and the parameters for each
setting.
