WAB-3001/WAB-3002 11b/g Wireless Outdoor Client Bridge/AP
Version 1.0
42
3. DHCP
Server
IP Address
: Enter the IP address.
Subnet Mask
: Enter the subnet mask for the IP address.
Default Gateway
: Enter the IP address for the default gateway.
DHCP
: Select Server from the drop-down list since this device is the DHCP server.
This device will distribute the IP addresses to the clients associated.
DHCP Client Range
: Enter the first and last IP address of the range. Make sure that
the range is on the same subnet as the device. You may click on the Show Client
button to view a list of IP addresses that were distributed.
DNS Server
: Enter the IP address of the DNS server.
802.1d Spanning Tree
: Select
Enabled
from the drop-down list if you if you would
like to use the spanning tree feature.
Click
on
the
Apply Changes
button to confirm the changes. This device will
automatically restart once these changes have been applied.
