WAB-3001/WAB-3002 11b/g Wireless Outdoor Client Bridge/AP
Version 1.0
20
Please wait and then enter the specified IP address into the web-browser. The
previous settings will be retained in AP mode. .
Refer
to
Chapter 5
to learn how to configure this device in Access Point mode.
4.2.2 Status
Click on the
Status
link under the
Management
menu. The
Status
page is the first
page that is displayed once you have logged in. This includes details about the
system, wireless, and TCP/IP configuration.
System
o
Uptime:
Duration of time since the device was last reset.
o
Firmware version
: Version of the firmware that is currently loaded on the
device.
Wireless Configuration
:
o
Mode
: Wireless configuration mode such as client bridge, AP, or WDS.
o
Band
: Frequency and IEEE 802.11 operation mode (b-only, g-only, or b+g).
o
SSID
: The name used to identify the wireless network.
o
Channel Number
: The channel used to communicate on the wireless
network.
o
Encryption
: The type of security used on this network. It may be disabled,
WEP, WPA, etc.
o
BSSID
: The MAC address of the SSID.
o
State
: The current state of the bridge. It may be scanning or associated or
disabled.
o
Signal Strength
: The signal strength of the wireless device.
