LevelOne VOI-8000 User Manual Download Page 3 | Manualshive

Page: 3 / 65

LevelOne VOI-8000 User Manual Download Page 3

VOI-8000 User’s Guide

Preface

iii

How to Use This Manual

This manual was designed for the non-technical users of the LevelOne VOI-8000, Internet
telephony gateway (ITG). It contains information about the functions operation and basic
instructions for its installation.

Chapter 1: Overview

This chapter provides conceptual overview and description of the VOI-8000(ITG),
explanation of how the VOI-8000(ITG) interacts with each for enabling VoIP services, and
an overview of the required tasks

Chapter 2: Installing the VOI-8000(ITG)

This chapter describes required steps to properly and safely install and configure the ITG on
your network

Chapter 3: VOI-8000(ITG) Concepts

This chapter gives information about the ITG technology and describes basic concepts using
ITG for providing telephony services over IP network

Chapter 4: Configuring VOI-8000(ITG) from Web Browser

This chapter explains procedures for configuring the ITG from a web browser

Chapter 5: Making a Call with VOI-8000(ITG)

This chapter explains how to make Internet calls from telephony devices connected to the
ITG directly or indirectly.

Chapter 6: Application Samples

This chapter provides some application examples and information on how to configure the
ITG under these samples.

Chapter 7: Troubleshooting Tips

This chapter provides troubleshooting information in case the user has problems installing or
maintaining the ITG.

«
1
2
3
4
5
...
»

Summary of Contents for VOI-8000


































































Reviews:

No comments