1.3 Setup
Plug and Play Installation for Homes:
HomePlug is plug and play device; user is able to plug and play without any complex configuration and settings.
Please execute the following hardware installation steps 1 to 4.
CO (Coordinator) installation:
1. Connect a standard LAN cable from the 200Mbps HomePlug AV Ethernet Bridge's Ethernet port to your PC or
Router (DHCP Server).
2. Plug the 200Mbps HomePlug AV Ethernet Bridge into a power outlet.
3. Wait a few seconds for startup to be completed, and then check the LEDs
The
Power
LED should be ON.
The
HomePlug
LED will be ON
The
Ethernet
LED should be ON.
Client device installation:
Connect a standard LAN cable from the 200Mbps HomePlug AV Ethernet Bridge's Ethernet port to your PC or
any other network devices with Ethernet port.
4. Wait a few seconds for startup to be completed, and then check the LEDs
The
Power
LED should be ON.
The
HomePlug
LED will be ON
The
Ethernet
LED should be ON.
5. Hardware Installation is now completed, enjoy HomePlug Powerline connectivity.
Note
The initial HomePlug device connects to the Powerline is called CO (Coordinator)
