HVE-6601 Receiver (Video Wall)
1.
DC5V:
Connect to the supplied AC adapter and plug into an electrical outlet.
2.
GIGA LAN:
Connect directly to a Transmitter or to a GIGA(1000Mbps) Ethernet
Switch using CAT6 cable.
3.
HDMI OUT:
Connect to an HDMI display device with an HDMI M-M cable. Use
an HDMI --> DVI adapter if the display is DVI.
4.
RS232:
Connect to the RS232 port of the device you want to configure. In
Video Wall system solutions it will not be used.
1.
POWER LED Blinking:
power on and the unit is booting up.
2.
POWER LED On:
power on and the unit is active.
3.
LINK LED Off:
LAN is not connected.
4.
LINK LED On:
LAN is connected.
5.
DATA LED Blinking:
The Receiver is connecting with Transmitter, or the HDMI
source is removed.
6.
DATA LED On:
All the connections are working.
7.
PB 1
: Change OSD shows control/Column position; Firmware Upgrade Mode
and Reset to default* using this button. Please to see the
Push Button
Descriptions.
8.
PB 2 :
change between Video Mode / Graphic Mode ; Anti-Dither ; Update
EDID* using this button. Please to see the
Push Button Descriptions.
9.
GROUP ID:
The d
efault GROUP ID is “0000”
