Layer 3 Forward and ARP Configuration
Chapter 2 ARP Scanning Prevention Function Configuration
http://www.level1.com
2-3
anti-arpscan trust ip
<ip-address>
[
<netmask>
]
no anti-arpscan trust ip
<ip-address>
[
<netmask>
]
Set the trust attributes of IP.
5. Configure automatic recovery time
Command
Explanation
Global configuration mode
anti-arpscan recovery enable
no anti-arpscan recovery enable
Enable
or
disable
the
automatic
recovery function.
anti-arpscan recovery time
<seconds>
no anti-arpscan recovery time
Set automatic recovery time.
6. Display relative information of debug information and ARP scanning
Command
Explanation
Global configuration mode
anti-arpscan log enable
no anti-arpscan log enable
Enable or disable the log function of ARP
scanning prevention.
anti-arpscan trap enable
no anti-arpscan trap enable
Enable or disable the SNMP Trap
function of ARP scanning prevention.
show anti-arpscan [trust
<ip | port |
supertrust-port>
| prohibited
<ip |
port>
]
Display the state of operation and
configuration
of
ARP
scanning
prevention.
Admin Mode
debug anti-arpscan
<port | ip>
no debug anti-arpscan
<port | ip>
Enable or disable the debug switch of
ARP scanning prevention.
