Device Setting
You can set the device by using the function key in the Device
Setting Dialog box.
Configuration Setting:
In this Configuration Setting, you can
set the IP Address, Subnet Mask, Gateway, Set Trap to (Trap
IP Address), System name, Location and DHCP function.
Select the device in the Discovery list or Monitor List and press
this button, then the Configuration Setting window will pop out,
after filling up the data that you want to change, you must fill up
the password and press the “Set” to process the data changed
immediately. The default password of this 48-Port
10/100/1000Mbps Gigabit Ethernet Web Smart Switch
configuration is “admin”.
Configuration Setting
Password Change:
You can use this Password Change when
you need to change the password, fill in the password needed
in the dialog box and press “Set” button to proceed the
password change immediately.
Password Change
19