10
Power On
Connect the power cord to the power socket on the rear panel of the
Switch. The other side of power cord connects to the power outlet.
The power supply in the Switch works with AC in the voltage range
100-240VAC, frequency 50~60Hz.
Check the power indicator on the front panel to see if power is
properly supplied.
3.
Connecting to the Switch (For Smart Switch
Model)
The Console port is a female DB-9 connector that enables a
connection to a PC or terminal for monitoring and configuring the
LevelOne GSW-2470TGX Smart Switch
. Use the supplied RS-232
cable with a male DB-9 connector to connect a terminal or PC to the
Console port.
The Console configuration (out of band) allow you to set your Switch
to enable a user at a remote console terminal to communicate with
the 24TX Intelligent Switch as if the console terminal were directly
connected to it.
Figure 3-1. Connecting the
LevelOne GSW-2470TGX Smart Switch
to a
terminal via RS-232 cable
