Figure 0-9
For example: as shown in Figure 3-11, when it is necessary to access multiple
broadband and the number of available physical interfaces of the router is
insufficient, it is necessary to expand the WAN port through the switch (this function
needs to be supported by the router function)
"
Figure 0-10
The relevant settings of the switch are the same as those in the previous example, except
that 24 ports are connected to the router, and 1-3 ports are connected to the corresponding
operator access equipment respectively. After completion, use the corresponding VLAN ID
in the router to configure the corresponding sub interface or related WAN port configuration
"
