are planned to VLAN 10, 20 and 30 respectively
"
Figure 0-7
First, add corresponding VLAN and port settings on the static VLAN page. Take vlan10 as
an example, fill in VLAN ID 10, select untagged under port 1, and tagged under port 24,
and click Add. After all VLANs are added, it should be as shown in Figure 3-9
"
Figure 0-8
Then enter the "VLAN port setting" page, select port 1, fill in PVID 10, and click apply. Set
port 2 and port 3 respectively according to this method, and pvids are 20 and 30
respectively. After completion, see Figure 3-10
"