LevelOne FSW-0803TX, User Manual

Page: 35 / 47

Mini Console
3-19
In the password session, a message “* * * *_ _ _ _ PSW” will be shown. You
have to key in the correct password to enter the submenu. The regular
Password assigned by you and the Back door Password are accepted. The
first four asterisks are used for normal password while the others are used for
Back door Password. The regular password is assigned by the user and the
Back door Password depends on the Key Code. See “Back Door Password”
on page 3-20 for more information.
After the password session is passed, you can go to the sub menu of UNIT
CONFIG. The lock sign on the Mini-Console is OFF and you are free to
configure any settings.
Secure the Switch
Two passwords are provided to protect the device from being accessed
anyone other than administrator. Further information regarding Password and
Back door Password, please refer to “Unlock the Console” section.
Set Password
You can configure a password by enter a 4 digit password using the numbers
from 0~9. The default is “0000”.
To set the password:
<UNIT CONFIG><SET PASSWORD> enter 4 digits.
After SET PASSWORD is selected, four “*’s” are displayed and the first “*”
is blinking indicating it is the current digit. Enter a new number using the
<Prev> key. Use the<Next> key to move from one digit of the password to
the next one. When the 4 password digits have been entered, press <Enter> to
complete the password setting. Ensure that you do not loose your password.