IP CamSecure
Config
75
Erase recorded information from the system
Step 1
:
Click New Period to get the Backup panel to add a new time period you want to erase all
the data recorded.
Step 2
: From the window at the top left, select the date you want to remove from, and you will see
red/green lines show on the time table implying available data recorded.
Step 3
:
You can select the data you wan to erase by left-clicking and dragging to high light the time
period. Besides using the time-table, you may indicate the time period of the data you want erase
by using Start Time and End Time in Date Time Period section.
Step 4
: In Select Camera(s) section, select the camera(s) from which you want to erase or select
all the cameras by clicking Select All bottom.
Step 5
: Check the box of Enable Preview to get the preview of the video you select
Step 6
:
Click OK when it is done and get back to the Backup panel.
Step 7
: Click on the Delete icon and erase the data.
Summary of Contents for FCS-8004
Page 2: ......
