IP CamSecure
Guard
37
Event - General Motion
Detect any movement in the defined detection zone.
Enable Event
Life Cycle
Activated Period
Basic Setting
Enable Event
: Check the box to activate.
Life Cycle
Automatic cancel event when event disappears
: the alarm/action will be off once the
abnormality is fixed or ends.
Manual cancel event or event last triggered
:
The alarm/action will continue until being cancel
from the Main Console (Start>Open Event Report>Cancel All). Therefore, when the user is
currently not at seat watching the screen he or she will be notified by the alarm.
Activated Period
: You can set the system to react during certain time period; for example, office
hours.
Summary of Contents for FCS-8004
Page 2: ......
