8 - User's Manual
Network Deployment
Setup the Network Camera over the Internet
This section explains how to confi gure the Network Camera over an Internet connection
.
1. If you have external devices such as sensors and alarms, connect them to the general I/O
terminal block.
2. Connect the camera to a switch via Ethernet cable.
3. Connect the supplied power cable from the Network Camera to a power outlet.
There are several ways to set up the Network Camera over the Internet
.
The fi rst way is to set
up the Network Camera behind a router
.
The second way is to utilize a static IP
.
The third way is
to use PPPoE
.
Internet connection via a router
Before setting up the Network Camera over the Internet, make sure you have a router and follow
the steps below.
1. Connect your Network Camera behind a router, the Internet environment is illustrated below.
Regarding how to obtain your IP address, please refer to Software Installation on page 11 for
details.
Ethernet Switch
1
2
1: Power
2: Digital ouput
3: Digital input
4: Ground
3
